How to Edge Sod ✨
Master the Art of Edging Sod with These Simple Tips
💡 SodDIY.com is reader-supported and may earn a small commission when you buy through our links.
Guide
Edging sod is an important step in maintaining the health and appearance of your lawn. It involves cutting a clean, straight line between the grass and any surrounding hardscaping or garden beds to keep the grass from encroaching on these areas. Here is a step-by-step guide on how to edge sod:
Step 1: Mark the Edging Line
Before you begin edging, you need to mark the line where you want to cut. You can use a garden hose, spray paint, or a length of rope to mark the edge. Make sure the line is straight and follows the contours of your lawn.
Step 2: Cut the Sod
Using a half-moon edger or a spade, cut along the marked line. Press the blade down into the soil about 2-3 inches deep and use a rocking motion to cut through the sod. Make sure to keep the blade perpendicular to the ground to ensure a straight cut.
Step 3: Remove the Sod
Once you have cut along the entire edge, use a shovel or a garden fork to remove the sod. You can either discard the sod or use it to patch any bare spots in your lawn.
Step 4: Clean Up the Edge
After removing the sod, use a rake to clean up any debris or loose soil along the edge. This will help create a clean, defined edge.
Step 5: Maintain the Edge
To keep your edge looking sharp, you will need to maintain it regularly. Use a string trimmer to keep the grass from growing over the edge, and re-cut the edge every few months to keep it looking clean.
Edging your sod is a simple but important task that can help keep your lawn looking its best. Follow these steps and you will have a clean, well-defined edge that will make your lawn the envy of the neighborhood.
Step 1: Mark the Edging Line
Before you begin edging, you need to mark the line where you want to cut. You can use a garden hose, spray paint, or a length of rope to mark the edge. Make sure the line is straight and follows the contours of your lawn.
Step 2: Cut the Sod
Using a half-moon edger or a spade, cut along the marked line. Press the blade down into the soil about 2-3 inches deep and use a rocking motion to cut through the sod. Make sure to keep the blade perpendicular to the ground to ensure a straight cut.
Step 3: Remove the Sod
Once you have cut along the entire edge, use a shovel or a garden fork to remove the sod. You can either discard the sod or use it to patch any bare spots in your lawn.
Step 4: Clean Up the Edge
After removing the sod, use a rake to clean up any debris or loose soil along the edge. This will help create a clean, defined edge.
Step 5: Maintain the Edge
To keep your edge looking sharp, you will need to maintain it regularly. Use a string trimmer to keep the grass from growing over the edge, and re-cut the edge every few months to keep it looking clean.
Edging your sod is a simple but important task that can help keep your lawn looking its best. Follow these steps and you will have a clean, well-defined edge that will make your lawn the envy of the neighborhood.
Rather have a pro do it for you?
Tools & Supplies to Edge Sod
| # | Item |
|---|---|
| 1 | Lawn edger |
| 2 | Spade shovel |
| 3 | Trowel |
| 4 | Garden gloves |
| 5 | Knee pads |
| 6 | Wheelbarrow |
| 7 | Pruning shears |
| 8 | Rake |
| 9 | String line |
| 10 | Spray paint (for marking the edge) |